| U1603 | U1602 | U1601 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Item number | U1603 | U1602 | U1601 | |||||||||
| Product details page | Details | Details | Details | |||||||||
| Dynamic range limit | ±1,25 X2 | ±1,25 X2 | ±1,25 X2 | |||||||||
| Chapter06 |
Analog output (voltage) Analog output (current) |
Switching output (binary) Switching output (relay) |
Analog output (voltage) Analog output (current) |
Switching output (binary) Switching output (relay) |
Analog output (voltage) Analog output (current) |
Switching output (binary) Switching output (relay) |
||||||
| Protection |
Terminals: IP 20 Housing: IP 40 |
Terminals: IP 20 Housing: IP 40 |
Terminals: IP 20 Housing: IP 40 |
|||||||||
| Participants per segment | 16 (32 where loop resistance is less than < 100 Ω) | 16 (32 where loop resistance is less than < 100 Ω) | 16 (32 where loop resistance is less than < 100 Ω) | |||||||||
| Max. input current | ≤ 2.5 X2 | ≤ 2.5 X2 | ≤ 2.5 X2 | |||||||||
| Relative humidity | 75%, no condensation allowed | 75%, no condensation allowed | 75%, no condensation allowed | |||||||||
| Model |
Switching output (binary): electrically isolated, passive Switching output (relay): electrically isolated |
Electrically isolated | Electrically isolated | Electrically isolated |
Switching output (binary): electrically isolated, passive Switching output (relay): electrically isolated |
Electrically isolated | Electrically isolated | Electrically isolated |
Switching output (binary): electrically isolated, passive Switching output (relay): electrically isolated |
Electrically isolated | Electrically isolated | Electrically isolated |
| Connection elements | Plug strip with screw connector (up to 255 users) | Pin strip, sub- miniature D9 | Plug strip with screw connector (up to 63 users per station) | Plug strip with screw connector (up to 255 users) | Pin strip, sub- miniature D9 | Plug strip with screw connector (up to 63 users per station) | Plug strip with screw connector (up to 255 users) | Pin strip, sub- miniature D9 | Plug strip with screw connector (up to 63 users per station) | |||
| Input resistance |
118kΩ X2: 20 mA: 75 Ω X2: 5 mA: 300 Ω |
118kΩ X2: 20 mA: 75 Ω X2: 5 mA: 300 Ω |
118kΩ X2: 20 mA: 75 Ω X2: 5 mA: 300 Ω |
|||||||||
| Terminal resistor | Can be connected | Can be connected | Can be connected | |||||||||
| Maximum values ??of measuring intervals; with date and time |
P maxint: the 10 highest values from all measuring intervals after the specified starting time P maxDay: respective daily maximum value for the current day and the last 10 days P maxMonth: respective monthly maximum value for the current month and the last 12 months P maxYear: the highest value from the current year, and the highest values from the last four years |
E maxint: the 10 highest values from all measuring intervals after the specified starting time E maxDay: respective daily maximum value for the current day and the last 10 days E maxMonth: respective monthly maximum value for the current month and the last 12 months E maxYear: the highest value from the current year, and the highest values from the last four years |
P maxint: the 10 highest values from all measuring intervals after the specified starting time P maxDay: respective daily maximum value for the current day and the last 10 days P maxMonth: respective monthly maximum value for the current month and the last 12 months P maxYear: the highest value from the current year, and the highest values from the last four years |
E maxint: the 10 highest values from all measuring intervals after the specified starting time E maxDay: respective daily maximum value for the current day and the last 10 days E maxMonth: respective monthly maximum value for the current month and the last 12 months E maxYear: the highest value from the current year, and the highest values from the last four years |
P maxint: the 10 highest values from all measuring intervals after the specified starting time P maxDay: respective daily maximum value for the current day and the last 10 days P maxMonth: respective monthly maximum value for the current month and the last 12 months P maxYear: the highest value from the current year, and the highest values from the last four years |
E maxint: the 10 highest values from all measuring intervals after the specified starting time E maxMonth: respective monthly maximum value for the current month and the last 12 months E maxYear: the highest value from the current year, and the highest values from the last four years |
||||||
| Input quantity |
Direct voltage (square-wave pulses, S0 compatible) Direct current |
Direct current (square-wave pulses, S0 compatible) |
Direct voltage (square-wave pulses, S0 compatible) Direct current |
Direct current (square-wave pulses, S0 compatible) |
Direct voltage (square-wave pulses, S0 compatible) Direct current |
Direct current (square-wave pulses, S0 compatible) | ||||||
| Input range | –X2 ≤ X ≤ +X2 | –X2 ≤ X ≤ +X2 | –X2 ≤ X ≤ +X2 | |||||||||
| Max. output current |
Analog output (voltage): ≤ 40 mA Analog output (current): ≤ 25 mA |
Analog output (voltage): ≤ 40 mA Analog output (current): ≤ 25 mA |
Analog output (voltage): ≤ 40 mA Analog output (current): ≤ 25 mA |
|||||||||
| Perm. switching elements | Semiconductor switch, relay | Semiconductor switch, relay | Semiconductor switch, relay | |||||||||
| Type of storage | Consecutive | Consecutive | Consecutive | |||||||||
| Transmission speed | Channel A/B: 1200 … 115,000 bit/s | 78 kbps | Channel A/B: 1200 … 115,000 bit/s | 78 kbps | Channel A/B: 1200 … 115,000 bit/s | 78 kbps | ||||||
| Number | 1 (FTT-10, 2-wire twisted-pair) | 1 (channel A and channel B) | 2 |
Switching output (binary): 4 Switching output (relay): 2 |
1 (FTT-10, 2-wire twisted-pair) | 1 (channel A and channel B) | 2 |
Switching output (binary): 4 Switching output (relay): 2 |
1 (FTT-10, 2-wire twisted-pair) | 1 (channel A and channel B) | 2 |
Switching output (binary): 4 Switching output (relay): 2 |
| Chapter21 | Storage of measured values | Storage of measured values | Storage of measured values | |||||||||
| Interpulse period Toff (parameters configurable) | ≥ 2 ms | ≥ 2 ms | ≥ 2 ms | |||||||||
| Chapter18 | Costs | Costs | Costs | |||||||||
| Pulse frequency | ≤ 250 Hz | ≤ 250 Hz | ≤ 250 Hz | |||||||||
| Chapter22 | Climatic withstand capability | Climatic withstand capability | Climatic withstand capability | |||||||||
| Max. input voltage |
Continuous ≤ 48 V Short-term (t ≤ 1 s) ≤ 60 V |
≤ 30 V |
Continuous ≤ 48 V Short-term (t ≤ 1 s) ≤ 60 V |
≤ 30 V |
Continuous ≤ 48 V Short-term (t ≤ 1 s) ≤ 60 V |
≤ 30 V | ||||||
| Mounting position | Any | Any | Any | |||||||||
| Permissible deviation | 10 ppm = 5.3 min. per year | 10 ppm = 5.3 min. per year | ||||||||||
| Parity | Even / no check | Even / no check | Even / no check | |||||||||
| Chapter20 | Display | Display | Display | |||||||||
| Operation mode |
Handshake Xon/Xoff or RTS / CTS Full-duplex |
Multi-master, half-duplex or full-duplex | LonTalk protocol (CSMA) |
Handshake Xon/Xoff or RTS / CTS Full-duplex |
Multi-master, half-duplex or full-duplex | LonTalk protocol (CSMA) |
Handshake Xon/Xoff or RTS / CTS Full-duplex |
Multi-master, half-duplex or full-duplex | LonTalk protocol (CSMA) | |||
| Accumulated energy for defined periods |
E Day for the current day and each of the last 10 days E Month for the current month and each of the last 12 months E Year for the current year and each of the last four years E int for all saved measuring intervals (measurement data list) |
E Day for the current day and each of the last 10 days E Month for the current month and each of the last 12 months E Year for the current year and each of the last four years E int for all saved measuring intervals (measurement data list) |
E Day for the current day and each of the last 10 days E Month for the current month and each of the last 12 months E Year for the current year, last year, and the year before last E int for all saved measuring intervals (measurement data list) |
|||||||||
| Pulse duration Ton (parameters configurable) | 10ms - 2550ms | 10ms - 2550ms | 10ms - 2550ms | |||||||||
| Operating cycles | Switching output (relay): ≤ 10^5 | Switching output (relay): ≤ 10^5 | Switching output (relay): ≤ 10^5 | |||||||||
| Max. output voltage |
Analog output (voltage): ≤ 12,5 V Analog output (current): ≤ 30 V |
Analog output (voltage): ≤ 12,5 V Analog output (current): ≤ 30 V |
Analog output (voltage): ≤ 12,5 V Analog output (current): ≤ 30 V |
|||||||||
| Altitude | To 2000 m | To 2000 m | To 2000 m | |||||||||
| Chapter19 | Power | Power | Power | |||||||||
| Status display | 2 LEDs | 1 LON LED active | 2 LEDs | 1 LON LED active | 2 LEDs | 1 LON LED active | ||||||
| Final value Y2 |
10 V 20 mA |
10 V 20 mA |
20 mA 10 V |
|||||||||
| Bus termination | 50/100 Ω can be connected | 50/100 Ω can be connected | 50/100 Ω can be connected | |||||||||
| Data protocol | HDLC/SDLC (adapted to multi-master needs). | HDLC/SDLC (adapted to multi-master needs). | HDLC/SDLC (adapted to multi-master needs). | |||||||||
| Load range |
Analog output (voltage): 2,5 kΩ ≤ 5 kΩ < ∞ Analog output (current): 0 ≤ 250 Ω ≤ 400 Ω |
Analog output (voltage): 2,5 kΩ ≤ 5 kΩ < ∞ Analog output (current): 0 ≤ 250 Ω ≤ 400 Ω |
Analog output (voltage): 2,5 kΩ ≤ 5 kΩ < ∞ Analog output (current): 0 ≤ 250 Ω ≤ 400 Ω |
|||||||||
| Chapter02 |
Analog input (voltage) Analog input (current) |
Analog input (voltage) Analog input (current) |
Analog input (voltage) Analog input (current) |
|||||||||
| Switching current |
Switching output (binary) OFF: ≤ 10 μA Switching output (binary) ON: ≤200 mA Switching output (relay): 8 A ohmic, 3 A inductive |
Switching output (binary) OFF: ≤ 10 μA Switching output (binary) ON: ≤200 mA Switching output (relay): 8 A ohmic, 3 A inductive |
Switching output (binary) OFF: ≤ 10 μA Switching output (binary) ON: ≤200 mA Switching output (relay): 8 A ohmic, 3 A inductive |
|||||||||
| Volume resistance (AC/DC) | Switching output (binary): 5 Ω | Switching output (binary): 5 Ω | Switching output (binary): 5 Ω | |||||||||
| Chapter03 | Binary input | Analog inputs | Binary input | Analog inputs | Binary input | Analog inputs | ||||||
| Mean values ??of measuring intervals | P int for all saved measuring intervals (measurement data list) | P int for all saved measuring intervals (measurement data list) | P int for all saved measuring intervals (measurement data list) | |||||||||
| Reset of counts to zero | Via PC or device keyboard | Via PC or device keyboard | Via PC or device keyboard | |||||||||
| Chapter17 | Energy | Energy | Energy | |||||||||
| Transmission (Hamming distance = 4) | 15,6 … 375 kbps | 15,6 … 375 kbps | 15,6 … 375 kbps | |||||||||
| Chapter01 | System data | System data | ||||||||||
| Switching voltage |
Switching output (binary): ≤ ±50 V Switching output (relay): 250 V~, 30 V= |
Switching output (binary): ≤ ±50 V Switching output (relay): 250 V~, 30 V= |
Switching output (binary): ≤ ±50 V Switching output (relay): 250 V~, 30 V= |
|||||||||
| Output range | –Y2 ≤ Y ≤ +Y2 | –Y2 ≤ Y ≤ +Y2 | –Y2 ≤ Y ≤ +Y2 | |||||||||
| Accumulated energy from defined starting point |
E tot tariff-independent E tot T1 from tariff 1 only E tot T2 from tariff 2 only E tot T1T2 from tariff 1 + tariff 2 |
E tot tariff-independent E tot T1 from tariff 1 only E tot T2 from tariff 2 only E tot T1T2 from tariff 1 + tariff 2 |
E tot tariff-independent E tot T1 from tariff 1 only E tot T2 from tariff 2 only E tot T1T2 from tariff 1 + tariff 2 |
|||||||||
| Common-mode rejection | ≥ 80 dB (≤120 Hz) | ≥ 80 dB (≤120 Hz) | ≥ 80 dB (≤120 Hz) | |||||||||
| Switching element |
Switching output (binary): Semiconductor relay Switching output (relay): Relay (changeover) |
Switching output (binary): Semiconductor relay Switching output (relay): Relay (changeover) |
Switching output (binary): Semiconductor relay Switching output (relay): Relay (changeover) |
|||||||||
| Chapter14 | LON interface (interface module for LON) | LON interface (interface module for LON) | LON interface (interface module for LON) | |||||||||
| Dimensions (W x H x D) | 212 x 125 x 85 mm | 212 x 125 x 85 mm | 212 x 125 x 85 mm | |||||||||
| Accumulated costs from defined starting point |
CostT1 from tariff 1 only CostT2 from tariff 2 only CostT1T2 from tariff 1 + tariff 2 |
CostT1 from tariff 1 only CostT2 from tariff 2 only CostT1T2 from tariff 1 + tariff 2 |
CostT1 from tariff 1 only CostT2 from tariff 2 only CostT1T2 from tariff 1 + tariff 2 |
|||||||||
| Weight | 1.6kg | 1.6kg | 1.6kg | |||||||||
| Duration of storage | With backup battery: ≥ 5 years (see also auxiliary power supply - backup battery) | With backup battery: ≥ 5 years (see also auxiliary power supply - backup battery) | With backup battery: ≥ 5 years (see also auxiliary power supply - backup battery) | |||||||||
| Storage depth |
With one channel: 87,380 entries With 64 channels: 3971 entries |
With one channel: 87,380 entries With 64 channels: 3971 entries |
With one channel: 87,380 entries With 64 channels: 3971 entries |
|||||||||
| Chapter09 | RS232 interface (M-Bus) | RS232 interface (M-Bus) | RS232 interface (M-Bus) | |||||||||
| Mounting type |
Top-hat rail mounting Screw mounted |
Top-hat rail mounting Screw mounted |
Top-hat rail mounting Screw mounted |
|||||||||
| Smallest time unit | 1 s | 1 s | ||||||||||
| Output quantity |
Direct current Direct voltage |
Direct current Direct voltage |
Direct voltage Direct current |
|||||||||
| Connection options |
Channel A: ECL, modem, terminal, radio-controlled clock Channel B: ECL, printer, radio-controlled clock. OFF |
Channel A: ECL, modem, terminal, radio-controlled clock Channel B: ECL, printer, radio-controlled clock. OFF |
Channel A: ECL, modem, terminal, radio-controlled clock Channel B: ECL, printer, radio-controlled clock. OFF |
|||||||||
| Topology (line and/or open ring) |
≤ 100 m: mixed ≤ 1200 m: open loop |
≤ 100 m: mixed ≤ 1200 m: open loop |
≤ 100 m: mixed ≤ 1200 m: open loop |
|||||||||
| Number of data bits | 8 | 8 | 8 | |||||||||
| Series resistor (internal) | 4,7 kΩ | 4,7 kΩ | 4,7 kΩ | |||||||||
| Temperature range |
Operation/function: –10 °C … +55 °C Storage, transport: –25 °C … +70 °C |
Operation/function: –10 °C … +55 °C Storage, transport: –25 °C … +70 °C |
Operation/function: –10 °C … +55 °C Storage, transport: –25 °C … +70 °C |
|||||||||
| Chapter13 | RS485 interface (Modbus) | RS485 interface (Modbus) | RS485 interface (Modbus) | |||||||||
| Alternating component | Analog output (voltage): 0.5% | Analog output (voltage): 0.5% | Analog output (voltage): 0.5% | |||||||||
| Instantaneous value | P mom calculated on the basis of the interval between the last two pulses | P mom calculated on the basis of the interval between the last two pulses | P mom calculated on the basis of the interval between the last two pulses | |||||||||
| Cable lengths |
Bus, terminated: ≤ 2700 m with special cable Free topology: ≤ 500 m |
Bus, terminated: ≤ 2700 m with special cable Free topology: ≤ 500 m |
Bus, terminated: ≤ 2700 m with special cable Free topology: ≤ 500 m |
|||||||||
| Material housing | Metal | Metal | Metal | |||||||||
| Display element | Graphic LCD, 128 x 128 (illuminated) | |||||||||||
| Format | 21 characters, 16 lines |